The owners are concerned about the safety of their homes and the ability to protect your loved ones and possessions. One answer is a DSC security system for a company with a history of 30 years. If the batteries run out of power or the children forget to close the windows, the control panel will let you know. Be familiar with the DSC alarms system installed and know how to fix minor and occasional problem, increase your sense of control and security.

DSC alarms

Instructions

Without energy

1
Shine a light in the house to make sure that the power outage is not for the whole system.

2

Search box for electrical circuits if the switches are circuit and put them down again in the top position.

3

Check that all cables are properly connected to the system transformer.

The system time is not properly configured

1
Open the cover on the control panel of the alarm on the front of the system and puts the four-digit master code, using the keys with red.

2
Press marked clock setting button. Click the marked hours and minutes until the current time you arrive buttons.

3
Press labeled “Done” and close the control panel cover button.

The alarm is ringing

1
Press labeled “System Status” twice and listening to the message system button.

2
Click on the marked “Disarm” to remove an old alarm that is still registered in the system, if the message refers to a specific place on the alarm button.

3
Check that all doors and windows are closed if the message tells you that a particular location is open.

4
Find the indicated sensor and replace the battery when the system indicates that a sensor needs.

5
Listen to the phone for an active dial tone if the message says you have a failure in communication, as this affects the ability to call your alarm monitoring agency. Make sure the phone cord is still in connection with making phone and the control panel of the alarm.

The sensor has failed

1
Test the sensor in question when the system indicates that one is in trouble pressing the buttons on your staff master four-digit code and then pressing the labeled “Test” button.

2
Listen as the system provides a list of the sensors in the home and tell you what needs to be fired.

3
Please review the specific sensor according to the announced location: Open the window or door, gently tapped on the glass or crosses sight motion sensor after standing for five minutes.