Alarm systems for the home can be complicated and expensive, so it is crucial to determine your security needs before starting the inquiry with alarm companies.

Instructions

Preliminary investigation

1
Check your home and determine how many windows and doors you want to ensure you want to integrate them or the security system.

security alarms for home

2
Determine possible locations for the control panel and keypads. You’ll find a convenient place to put the keypad near the front door instead. You can also place one near the bedrooms. The control panel commands the system and the keypads allow you to program the system and turn it on, or powering on or off its components.

 
3
Determines how far away from windows and doors is on the panel, so you can calculate the cables if you choose a wired alarm, or how much scope should have the wireless system to communicate with sensors. Keep in mind that it is difficult to install a security system cables, unless your house is under construction.

4
Decide where you want a security system monitored 24 hours. The central monitoring station monitors your home for a monthly fee. A less expensive alternative is a basic sensor system with accessory dial to connect the system to your lines phone and dials preselected numbers if security of the house violated.

5
Consider your lifestyle. Does anyone in your family often looking for a midnight snack? Have a large pet that roams the house at night? These circumstances influence the type of motion sensor you select and how to install it. You can tell your family where are the keypads to prevent false alarms.

Choosing the system

1
Find a consultant of home security systems with good reputation.

2
Choose a system with a control panel that can monitor areas that have in the house. Each window or door integrated into the system is considered a zone. A basic system is capable of controlling eight zones. However, many panels allow adding expansion modules that allow the system to monitor up to 32.

3
Determines is the security system wires are too long. With the cable system, you have to make holes in the walls where they will route the wiring. If the cable is too long, choose a wireless system.

4
Check that the wireless system reaches the far zone.

5
Make sure the system you choose can accept sensors protection against fire, carbon monoxide sensors and gas detectors, switches operating at low temperatures (especially in cold climates) and water detectors. Make sure that panic buttons are included.

6
Use a system user friendly. Make sure you place the code on the keypad is not a complicated process and each member of the family can learn quickly. You will not want to see the manual every time you put codes or interpreters.

7
Use the keypad or the system you selected for yourself to be sure that it is easy to use. Encourage your family members to use the keyboard that will select for each use comfortably.